Related Experiment Video
Updated: Jun 5, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Boron removal and recovery from concentrated wastewater using a microwave hydrothermal method
Hao-Cheng Tsai1, Shang-Lien Lo
1Graduate Institute of Environmental Engineering, National Taiwan University, 71 Chou-Shan Rd., Taipei 106, Taiwan.
Abstract:
Boron compounds are widely-used raw materials in industries. However, elevated boron concentrations in aqueous systems may be harmful to human and plants. In this study, calcium hydroxide (Ca(OH)(2)) alone and Ca(OH)(2) with phosphoric acid (H(3)PO(4)) addition (P-addition) were used to remove and recover boron from wastewater using hydrothermal methods. A microwave (MW) hydrothermal method was used and compared with the conventional heating (CH) method in batch experiments. Physicochemical properties of the precipitates obtained from both methods were analysed by XRD, SEM with EDX and BET. For the case of Ca(OH)(2) alone and the MW method, experimental results showed that boron recovery efficiency reached 90% within 10 min, and crystals of Ca(2)B(2)O(5)·H(2)O were found in the precipitates as indicated by the XRD analysis. For the case of P-addition and the MW method, boron recovery efficiency reached 99% within 10 min, and calcium phosphate species (CaHPO(4)·H(2)O, CaHPO(4) and Ca(10)(PO(4))(6)(OH)(2)) were formed. The experimental results of this study indicate that the required reaction time of the MW method was much less than that of the CH method, and the MW method is an effective and efficient method for boron removal and recovery from concentrated wastewater.
Related Concept Videos
Hydroboration-Oxidation of Alkenes
Microbial Bioremediation of Uranium
Microbial Leaching
Microbial Wastewater Treatment
Microbial Bioremediation of Hydrocarbons
Preparation of Alcohols via Addition Reactions
The acid-catalyzed addition of water to the double bond of alkenes is a large-scale industrial method used to synthesize low-molecular-weight alcohols. An acidic atmosphere is required to allow the hydrogen in the water molecule to act as an electrophile and attack the double bond in an alkene. The addition of a proton to the double bond creates a carbocation intermediate. The proton preferentially bonds to the less substituted end of the double bond to create a more stable carbocation...

