Related Experiment Video
Updated: Jun 5, 2026

Rapid Testing of Resistance of Timber to Biodegradation by Marine Wood-Boring Crustaceans
Published on: January 29, 2022
Application of a CCA-treated wood waste decontamination process to other copper-based preservative-treated wood after
Amélie Janin1, Lucie Coudert, Pauline Riche
1University of Toronto, Faculty of Forestry, 33, Willcocks St., Toronto, ON, M5S 3B3 Canada. amelie.janin@ete.inrs.ca
Abstract:
Chromated copper arsenate (CCA)-treated wood was widely used until 2004 for residential and industrial applications. Since 2004, CCA was replaced by alternative copper preservatives such as alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ), for residential applications due to health concerns. Treated wood waste disposal is becoming an issue. Previous studies identified a chemical process for decontaminating CCA-treated wood waste based on sulfuric acid leaching. The potential application of this process to wood treated with the copper-based preservatives (alkaline copper quaternary (ACQ), copper azole (CA) and micronized copper quaternary (MCQ)) is investigated here. Three consecutive leaching steps with 0.1 M sulfuric acid at 75°C for 2 h were successful for all the types of treated wood and achieved more than 98% copper solubilisation. The different acidic leachates produced were successively treated by coagulation using ferric chloride and precipitation (pH=7) using sodium hydroxide. Between 94 and 99% of copper in leachates could be recovered by electrodeposition after 90 min using 2 A electrical current. Thus, the process previously developed for CCA-treated wood waste decontamination could be efficiently applied for CA-, ACQ- or MCQ-treated wood.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Leaching
Bioremediation
Precipitation and Co-precipitation

