Effects of pH and particle size on kinetics of nitrobenzene reduction by zero-valent iron

Nitrobenzene has been considered as a significant groundwater contaminant due to its wide usage in explosives, insecticides, herbicides, pharmaceuticals and dyes. Nitrobenzene is of environmental concern because of its toxicity. In the presence of zero-valent iron (ZVI), reduction of the nitro group is the dominant transformation process for nitrobenzene. A series of experiments were carried out to investigate the kinetics of nitrobenzene reduction by ZVI and the effects of pH and ZVI particle size on nitrobenzene removal in groundwater. The results indicated that nitrobenzene could be reduced to aniline by ZVI; the reduction of nitrobenzene by ZVI followed a pseudo first-order kinetics; the observed nitrobenzene reduction rate constant (k(obs)) was 0.0006 min(-1) and the half-life of nitrobenzene (t1/2) was 115.5 min; the mass balance achieved 87.5% for nitrobenzene reduction by the 1 mm ZVI particle and the final removal efficiency was 80.98%. In addition, the pH and ZVI particle size were found to exhibit significant influences on the nitrobenzene reduction. The observed nitrobenzene reduction rate constant linearly decreased with increase pH and the data fitted on polynomial regression equation for the observed nitrobenzene reduction rate constant and ZVI particle size. Therefore, use of ZVI based permeable reactive barrier technology to remedy nitrobenzene contaminated groundwater was feasible.