Related Experiment Video
Updated: Jun 5, 2026

Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
Comprehensive two-dimensional gas chromatography time of flight mass spectrometry (GC×GC-TOFMS) for environmental
Jayne de Vos1, Roger Dixon, Gerhard Vermeulen
1Organic and Bio-Analysis Group, Metrology in Chemistry Area, National Metrology Institute of South Africa, Private Bag X34, Lynnwood Ridge 0040, South Africa. bjdevos@nmisa.org
Abstract:
The disposal and dumping of toxic waste is a matter of growing concern in developing countries, including South Africa. Frequently these countries do not possess access to gas chromatography-high resolution mass spectrometry (GC-HRMS) for the determination of persistent organic pollutants (POPs). This publication describes an alternative approach to the investigation of toxic waste using comprehensive gas chromatography coupled to time of flight mass spectrometry (GC×GC-TOFMS). The technology permits both comprehensive screening of toxic samples for numerous classes of organic pollutants and also quantitative analysis for the individual compounds. This paper describes the use of this technique by analysing samples obtained from a hazardous waste treatment facility in South Africa. After sampling and extraction the samples were analysed for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and four dioxin-like non-ortho substituted polychlorinated biphenyls (PCBs). The quantitative values, as well as detection limits, obtained using the GC×GC-TOFMS methodology compares well with those obtained using GC-HRMS; the accepted benchmark technology for this analysis. Although GC×GC-TOFMS is not a target compound analytical technique (as is GC-HRMS), it is possible to obtain information on numerous other classes of organic pollutants present in the samples in one analytical run. This is not possible with GC-HRMS. Several different column combinations have been investigated for handling very complex waste samples and suggestions are presented for the most suitable combination.
More Related Videos
10:14Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
07:57Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Tandem Mass Spectrometry
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...