Related Experiment Video
Updated: Jun 4, 2026

Analysis of Contact Interfaces for Single GaN Nanowire Devices
Published on: November 15, 2013
Selective-area catalyst-free MBE growth of GaN nanowires using a patterned oxide layer
T Schumann1, T Gotschke, F Limbach
1Institute of Bio- and Nanosystems (IBN-1), Research Centre Jülich GmbH, Jülich, Germany.
Abstract:
GaN nanowires (NWs) were grown selectively in holes of a patterned silicon oxide mask, by rf-plasma-assisted molecular beam epitaxy (PAMBE), without any metal catalyst. The oxide was deposited on a thin AlN buffer layer previously grown on a Si(111) substrate. Regular arrays of holes in the oxide layer were obtained using standard e-beam lithography. The selectivity of growth has been studied varying the substrate temperature, gallium beam equivalent pressure and patterning layout. Adjusting the growth parameters, GaN NWs can be selectively grown in the holes of the patterned oxide with complete suppression of the parasitic growth in between the holes. The occupation probability of a hole with a single or multiple NWs depends strongly on its diameter. The selectively grown GaN NWs have one common crystallographic orientation with respect to the Si(111) substrate via the AlN buffer layer, as proven by x-ray diffraction (XRD) measurements. Based on the experimental data, we present a schematic model of the GaN NW formation in which a GaN pedestal is initially grown in the hole.

