Related Experiment Video
Updated: Jun 4, 2026

Chemical Precipitation Method for the Synthesis of Nb2O5 Modified Bulk Nickel Catalysts with High Specific Surface Area
Published on: February 19, 2018
Retention of nickel from aqueous solutions using iron oxide and manganese oxide coated sand: kinetic and
N Boujelben1, J Bouzid, Z Elouear
1Laboratoire Eau Energie et Environnement, département de génie géologique, Ecole Nationale d'Ingénieurs de Sfax, BP W 3038 Sfax, Tunisia. nesrine.boujelben@tunet.tn
Abstract:
In this study, the removal of nickel ions from aqueous solutions using iron oxide and manganese oxide coated sand (ICS and MCS) under different experimental conditions was investigated. The effect of metal concentration, contact time, solution pH and temperature on the amount of Ni(II) sorbed was studied and discussed. Langmuir and Freundlich isotherm constants and correlation coefficients for the present systems at different temperatures were calculated and compared. The equilibrium process was well described by the Langmuir isotherm model: the maximum sorption capacities (at 29 K) were 2.73 mg Ni/g and 3.33 mg Ni/g of sorbent for ICS and MCS, respectively. Isotherms were also used to evaluate the thermodynamic parameters (deltaG degrees, deltaH degrees, deltaS degrees) of adsorption. The sorption kinetics were tested for the pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Good correlation coefficients were obtained for the pseudo-second-order kinetic model, showing that the nickel uptake process followed the pseudo-second-order rate expression.
More Related Videos
Related Concept Videos
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Microbes and Other Elemental Cycles
Washing, Drying, and Ignition of Precipitates

