Dry pretreatment of lignocellulose with extremely low steam and water usage for bioethanol production
Related Experiment Video
Updated: Jun 4, 2026

Pretreatment of Lignocellulosic Biomass with Low-cost Ionic Liquids
Published on: August 10, 2016
Jian Zhang1, Xiusheng Wang, Deqiang Chu
1State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China.
Abstract:
Two rarely noticed but important parameters of the dilute sulfuric acid pretreatment of lignocellulose biomass, the feedstock filling ratio to the pretreatment reactor and the solids/liquid presoaking ratio, were extensively studied. The effects of the two parameters on the steam consumption, waste water generation, and pretreatment efficiency were investigated. At the full filling ratio and high solids/liquid presoaking ratio, this "dry" pretreatment method provided at least the following advantages: (1) the steam consumption was significantly reduced; (2) no aqueous acid containing waste water was generated; (3) high solids content of the pretreated materials were obtained and the consequent saccharification and fermentation was carried out at high solids loading easily. This method was applied to various lignocellulose feedstocks successfully and provided a practical means to produce ethanol economically feasible.
Related Concept Videos
Production of Alcohol
Production of Organic Acids
Biofuels
Biological Treatment of Effluent and Waste Water
Bioreactor Controls-III

