Related Experiment Video
Updated: Jun 4, 2026

Ion-Exchange Membranes for the Fabrication of Reverse Electrodialysis Device
Published on: July 20, 2021
The power efficiency of the Tajo-Segura transfer and desalination
1Department of Applied Economic Analysis, University of Alicante, Campus de San Vicente del Raspeig, Ap. 99, E-03080, Alicante. jmelgar@ua.es
Abstract:
The origin of the water supply system of Tajo-Segura, in 1932, goes back to when it was the unique possible solution to the shortage of hydric resources in the Confederación Hidrográfica del Segura (CHS). Its energy consumption is not homogeneous; it could be bigger or smaller, depending on the different water destination. The energy cost average of water of the Tajo-Segura water supply system is 1.21 kWh/m3. The energy consumption of desalination depends on the type of process used to desalinate the water, the time of operation and the capacity of the plant, and also on the density of water to treat. In any case, the energy consumption of the desalination ranges between 3.8 and 4.2 kWh/m3; obviously that is bigger than those obtained of the Tajo-Segura water supply system (1.21 kWh/m3).
Related Concept Videos
Osmosis and Osmotic Pressure of Solutions
Energy Line and Hydraulic Gradient Line
Efficiency of The Carnot Cycle
Biological Treatment of Effluent and Waste Water
Maximum Power Flow and Line Loadability
Carnot Cycle and Efficiency

