Related Experiment Video
Updated: Jun 4, 2026

Dependence of Laser-induced Breakdown Spectroscopy Results on Pulse Energies and Timing Parameters Using Soil Simulants
Published on: September 23, 2013
[Measurement and analysis of copper in soil using laser-induced breakdown spectroscopy]
Cui-ping Lu1, Wen-qing Liu, Nan-jing Zhao
1Key Laboratory of Environment Optics and Technology, Chinese Academy of Sciences, Anhui Province Laboratory of Environment Optics Monitoring Technology, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China. cplu@aiofm.ac.cn
Abstract:
The present paper analyzed the characteristics of laser-induced breakdown spectroscopy (LIBS) of metal element Cu in soil using the Nd:YAG (wavelength: 1064 nm) laser as the excitation source, where the spectral signals were detected by the highly resolved and wide spectral echelle spectrograph and intensified charge coupled device (ICCD). The time evolution of the characteristic spectral line of Cu was obtained by changing the delay time of ICCD at the same concentration and the gate of ICCD with wavelength of 329. 396 nm of Cu as the characteristic spectral line, from which the best delay time 1.1 micros was found. By measuring the intensities of the characteristic spectral line with different Cu concentrations, it was demonstrated that the intensities of the spectral line increased with the concentration of Cu under the condition of low concentration From the results the LIBS calibration curve of Cu was obtained, and by fitting calculation the detection limit of Cu in soil at 13. 36 microg x g(-1) was obtained.
Related Concept Videos
Atomic Emission Spectroscopy: Overview
Atomic Emission Spectroscopy: Lab

