Physiological responses to temperature and humidity compared to the assessment by UTCI, WGBT and PHS

In COST Action 730, a multi-segmental thermophysiological model was used to describe physiological strain reactions for different climatic conditions in order to develop a 'Universal Thermal Climate Index' (UTCI). UTCI predictions for warm climates were compared with empirical data from the laboratory tests. The comparison was performed by means of equivalence lines within a psychrometric chart so that the combined influence of air temperature and humidity on physiological strain may be assessed. Within a reasonable regime of air temperatures and relative humidities (RH), the differences between simulated and measured values were as follows: for rectal temperatures below 0.3°C, for skin temperatures below 1.5°C, for sweat rates below 200 g/h and for heart rates (estimated from relative cardiac output) below 30 min(-1). This characterises the validity of the model with respect to the description of the influence of heat and humidity on physiological strain. The same comparison to physiological data was also conducted for the equivalent temperature calculated for UTCI. In order to compare UTCI with other thermal indices used in occupational health, the physiological data have also been compared to equivalence lines of WBGT (Wet Bulb Globe Temperature) and PHS (Predicted Heat Strain) indices.