Novel control and steady-state correction method for standard 28-day bioaccumulation tests using Nereis virens

Evaluation of dredged material for aquatic placement requires assessment of bioaccumulation potentials for benthic organisms using standardized laboratory bioaccumulation tests. Critical to the interpretation of these data is the assessment of steady state for bioaccumulated residues needed to generate biota sediment accumulation factors (BSAFs) and to address control correction of day 0 contaminant residues measured in bioassay organisms. This study applied a novel performance reference compound approach with a pulse-chase experimental design to investigate elimination of a series of isotopically labeled polychlorinated biphenyl ((13)C-PCBs) in the polychaete worm Nereis virens while simultaneously evaluating native PCB bioaccumulation from field-collected sediments. Results demonstrated that all (13)C-PCBs, with the exception of (13)C-PCB209 (> 80%), were eliminated by more than 90% after 28 d. The three sediment types yielded similar (13)C-PCB whole-body elimination rate constants (k(tot)) producing the following predictive equation: log k(tot)  =  - 0.09 × log K(OW)  - 0.45. The rapid loss of (13)C-PCBs from worms over the bioassay period indicated that control correction, by subtracting day 0 residues, would result in underestimates of bioavailable sediment residues. Significant uptake of native PCBs was observed only in the most contaminated sediment and proceeded according to kinetic model predictions with steady-state BSAFs ranging from 1 to 3 and peaking for congeners of log K(OW) between 6.2 and 6.5. The performance reference compound approach can provide novel information about chemical toxicokinetics and also serve as a quality check for the physiological performance of the bioassay organism during standardized bioaccumulation testing.