Polarisation stabilisation of vertical cavity surface emitting lasers by minimally invasive focused electron beam...

Local electron triggered reactions of functional surface adsorbates were used as a maskless, dry, and minimally invasive nanolithography concept to stabilize the polarisation of individual vertical cavity surface emitting lasers (VCSELs) on a wafer in a post-processing step. Using a 30 keV focused electron beam of a scanning electron microscope and injecting volatile organo-metallic (CH(3))(2)Au(tfa) molecules, polarisation gratings were directly written on VCSELs by dissociating the surface adsorbed molecules. The electron triggered adsorbate dissociation resulted in electrically conductive Au-C nano-composite material, with gold nanocrystals embedded in a carbonaceous matrix. A resistivity of 2500 µΩcm was measured at a typical composition of 30 at.% Au. This material proved successful in suppressing polarisation switching when deposited as line gratings with a width of 200 nm, a thickness of 50 nm, and a pitch of 500 nm and 1 µm. Refractive index measurements suggest that the optical attenuation by the deposited Au-C material is much lower than by pure Au thus giving a low emission power penalty while keeping the polarisation stable.