Glutaraldehyde exposure and its occupational impact in the health care environment
Derek R Smith1, Rui-Sheng Wang
1Department of Hazard Assessment, National Institute of Industrial Health, 214-8585, Kawasaki, Japan, smith@niih.go.jp.
Abstract:
Despite the search for effective and less toxic substitutes, glutaraldehyde (GA) remains one of the few substances capable of high-level instrument disinfection in modern health care. Workers commonly affected include operating room nurses, radiographers, x-ray technicians and cleaners. Widespread hospital usage combined with its well-known irritant properties, has ensured an increase in occupationally-related illnesses during recent years. Operating room nurses, laboratory workers and x-ray technicians frequently contact GA in both the liquid and vapor form. Workplace exposure is usually dependent on job tasks, ventilation levels and the use of protective equipment. GA is a relatively potent irritant and sensitizer, with a well-documented history of symptoms following occupational exposure. Although mechanisms for GA toxicity have been postulated, research on the toxicological, teratogenic, and carcinogenic potential of this chemical has shown inconsistent results. Reducing workplace exposure to its lowest possible level represents the most important hazard reduction strategy. This may be achieved by keeping GA containers tightly sealed when not in use, maintaining adequate ventilation levels and the rigid adherence to appropriate personal protective equipment. Substitution with automated cold sterilization machines may be another appropriate measure, while banning unnecessary practices such as GA fogging and its use as a surface disinfectant may also be helpful in reducing occupational exposure in the health care environment.
Related Concept Videos
Types of Toxins
Air pollutants, primarily gases, pose significant threats to respiratory health, leading to conditions like hypoxia, lung cancer, and in extreme cases, death.
Environmental pollutants like...
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Toxic Reactions: Overview
Toxicity falls into two primary categories: local and systemic.
Local toxicity appears at the exposure site, such as protein denaturation caused by caustic substances.
In contrast, systemic toxicity requires the toxic agent's absorption and distribution,...
Phase II Reactions: Glutathione Conjugation and Mercapturic Acid Formation
Several distinctive characteristics distinguish glutathione conjugation from other phase II...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...


