Related Experiment Video
Updated: Jun 3, 2026

Continuous Venous-Arterial Doppler Ultrasound During a Preload Challenge
Published on: January 20, 2023
Continuous cardiac output monitoring with an uncalibrated pulse contour method in patients supported with mechanical
Sabino Scolletta1, Fabio Miraldi, Salvatore Mario Romano
1Department of Surgery and Bioengineering, University of Siena, Siena, Italy.
Abstract:
We evaluated the accuracy of an uncalibrated pulse contour method called Pressure Recording Analytical Method (PRAM) compared with continuous thermodilution for cardiac output (CO) monitoring in patients implanted with a pulsatile left ventricular assist device (LVAD). Twelve adult patients implanted with the HeartMate I-XVE device were studied. CO was simultaneously evaluated by PRAM and by continuous thermodilution. Blood flow values displayed by the LVAD's console were also used for the comparison. Bland-Altman and linear regression analyses were applied. A total of 72 CO measurements (range 3.8-6.7 l/min) were obtained. Mean CO was 5.23±0.70 l/min for the 'hot' pulmonary thermodilution (ThD-CCO) method, 5.28±0.63 l/min for PRAM and 4.83±0.67 l/min for LVAD-CO. A high correlation (r=0.90), a good agreement (mean bias -0.04 l/min, precision ±0.38 l/min) and a low percentage of error (7.3%) were observed between PRAM-CO and ThD-CCO. A good correlation was found between LVAD-CO and either ThD-CCO (r=0.88) or PRAM-CO (r=0.86), but an overestimation of 10% was observed for both PRAM-CO (mean bias -0.44 l/min) and ThD-CCO (mean bias -0.40 l/min). Our results demonstrated good agreements between PRAM-CO, ThD-CCO and LVAD-CO. PRAM derives CO from a peripheral artery without calibration and may be a complementary tool in the hemodynamic assessment of patients supported with a VAD.
Related Concept Videos
Pulse rhythm
Conversely, an irregular pulse pattern is termed dysrhythmia, stemming from disruptions in cardiac muscle...
Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
Pulse
Pulse Rate and its Significance
Pulse rate, often measured in beats per minute (bpm), reflects the heart rate (HR), which is influenced by numerous factors such as stress, physical activity, and hormonal changes. A normal resting adult pulse rate falls between...
Assessing Blood pressure using a doppler ultrasound
Pre-Procedural Guidelines for Doppler Ultrasound Blood Pressure Assessment:
Preparation of Equipment:
