Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

A polymer composite of polypropylene (PP) and clinoptilolite (CLI) for the adsorption of lead has been prepared using the melt-mixing compounding technique in a rheomixer. Characterization of the composite was performed using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), Brunuer-Emmett-Teller (BET), and Fourier transform infrared spectroscopy (FTIR). The influence of contact time, pH, initial metal-ion concentration, temperature, and pretreatment on the adsorption of lead (Pb) by the PP-CLI composite was investigated. Optimum pH was found to be between pH 6 and pH 8 while the maximum sorption of lead at optimal pH was 95%. No difference was observed between the adsorption behavior of composites functionalized with 20% and 30% clinoptilolite, respectively, while the pretreatment with HCl and NaCl made a slight difference to the adsorption capacity of composites. The findings from this study on the lead adsorption behavior of CLI-PP composite may have potential applications in wastewater and water purification works.