Related Experiment Video
Updated: Jun 2, 2026

Atomic Force Microscopy Cantilever-Based Nanoindentation: Mechanical Property Measurements at the Nanoscale in Air and Fluid
Published on: December 2, 2022
Transverse mechanical properties of collagen fibers from nanoindentation
Katerina E Aifantis1, Sanjiv Shrivastava, Gregory M Odegard
1Laboratory of Mechanics, Aristotle University of Thessaloniki, 54-124 Thessaloniki, Greece. kaifanti@mtu.edu
Abstract:
The mechanical properties of collagenous tissues, such as tendon and ligaments, are of particular interest as they are found extensively in the human body. In the present study the transverse mechanical properties of collagen fibers are reported for the first time. The elastic modulus was found to be 63 ± 4 MPa, while the viscosity was estimated to be 14 GPa ≤ η ≤ 56 GPa s. Comparison with similar data in the literature, for bulk tendon and collagen fibrils, suggests that the apparent modulus of a network of interconnected building blocks is reduced as compared to the modulus of the individual building blocks; in particular E (tendon) < E (fiber) < E (fibril); this is due to the fact that as the scale of the microstructure increases (i) slippage and sliding between the respective building blocks (fibrils or fibers) increases, (ii) the volume fraction of the stiff collagen proteins decreases.
Related Concept Videos
Deformations in a Transverse Cross Section
As the material stretches, it expands or contracts in orthogonal directions to the load. This phenomenon varies...
Normal Strain under Axial Loading
Fibril-associated Collagen
For example, the type II collagen fibrils in cartilage have covalently bound type IX fibril-associated collagens at regular intervals. Other types of fibril-associated collagens are...

