Related Experiment Video
Updated: Jun 1, 2026

Advances in Nanoscale Infrared Spectroscopy to Explore Multiphase Polymeric Systems
Published on: June 23, 2023
[Quantitative determination of PVC concentration by Raman spectrum]
Zheng-liang Huang1, Jing-dai Wang, Bin-bo Jiang
1State Key Laboratory of Chemical Engineering, Zhejiang University, Hangzhou 310027, China. huangzhengl@zju.edu.cn
Abstract:
Quantitative determination of polyvinyl chloride (PVC) concentration by Raman spectrum was studied in the present work. According to partial least squares (PLS) analysis, it was found that scores of PLS factor 1 were proportional to the concentrations of the sample solutions. Meanwhile, the loadings of factor 1 could reflect the contents of PVC and cyclohexanone simultaneously. The PLS regression model for PVC concentration prediction was built. The values of r and root mean square error (RMSE) between predictive results and actual values were 0.9963 and 2.775, respectively. The Raman characteristic peaks of PVC and cyclohexanone were found, including the C-Cl bond for PVC (620 and 695 cm(-1)) and the alicyclic ketone for cyclohexanone (1709 cm(-1)). By using internal standard method, another model for PVC concentration prediction was established, and the values of r and RMSE were 0.9941 and 3.151, respectively. The results indicated that it is feasible to use Raman spectrum to detect the PVC concentration, which is of significant importance to PVC recycling.
More Related Videos
05:05Quantification of Polybutylene Adipate Terephthalate-based Micro- and Nano-plastics from Soil Using Proton Nuclear Magnetic Resonance Spectroscopy
Published on: June 6, 2025
04:37Detection and Quantification of Mono-Rhamnolipids and Di-Rhamnolipids Produced by Pseudomonas aeruginosa
Published on: March 29, 2024
Related Concept Videos
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
UV–Vis Spectroscopy of Conjugated Systems
One of the factors influencing λmax is the extent of conjugation in the...