Related Experiment Video
Updated: Jun 1, 2026

Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
CMK-3 nanoporous carbon as a new fiber coating for solid-phase microextraction coupled to gas chromatography-mass
Akram Rahimi1, Payman Hashemi, Alireza Badiei
1Department of Chemistry, Lorestan University, Khoramabad, Iran. payman hashemi@yahoo.com
Abstract:
CMK-3 nanoporous carbon was prepared and characterized as a highly porous fiber coating, with a highly ordered carbon framework, for solid-phase microextraction (SPME). The nanomaterial was immobilized onto platinum, stainless steel and copper metal wires for preparation of new SPME fibers. The copper-CMK-3 fiber showed superior properties and therefore was applied for extraction of some phenolic compounds in combination with GC-MS. For optimization of the extraction conditions, a simplex optimization method was used. The selected conditions were: sample volume 13 ml, extraction temperature 56°C, extraction time 7 min, ultrasonic time 5.5 min, pH 5 and salt concentration 8.9%. The selected fiber showed some selectivity towards the polar phenolic compounds and its extraction efficiency was better than a commercial PDMS fiber. Linear calibration curves with correlation coefficients better than 0.99 and detection limits in the range from 0.002 to 0.068 μg mL(-1) were obtained for the fiber. No significant change was observed in the extraction efficiency of the new SPME fiber over at least 40 extractions. The fiber was successfully used for the determination of phenolic compounds in natural water samples.
More Related Videos
13:35A Convenient Method for Extraction and Analysis with High-Pressure Liquid Chromatography of Catecholamine Neurotransmitters and Their Metabolites
Published on: March 1, 2018
04:32Extraction of Cofactor F420 for Analysis of Polyglutamate Tail Length from Methanogenic Pure Cultures and Environmental Samples
Published on: October 14, 2021
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Capillary Electrophoresis: Applications
Capillary zone electrophoresis (CZE) separates ionic components based on their electrophoretic mobility. It has been used to separate proteins, amino acids,...
Supercritical Fluid Chromatography
SFC utilizes a supercritical fluid mobile phase,...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Silica Gel Column Chromatography: Overview
Polar components tend to bind strongly to the silica gel, causing them to move slowly through the column. In contrast, nonpolar compounds...