Most pressure gauges, like those on scuba tanks, are calibrated to read zero at atmospheric pressure. Readings from such gauges are called the gauge pressure, which is the pressure relative to atmospheric pressure. When the pressure inside the tank exceeds atmospheric pressure, the gauge reports a positive value. Some gauges are designed to measure negative pressure. For example, many physics experiments must take place in a vacuum chamber, a rigid chamber from which some of the air is pumped...

The concept of pressure at a point in a fluid establishes that pressure within a fluid is uniform in all directions at a specific location. This uniformity occurs because fluid molecules exert force evenly across any point due to their random motion and continuous collisions within the fluid. Pressure at a point is determined by the surrounding fluid molecules and is influenced by factors like depth and density, rather than by shape or orientation.
In a fluid at rest, pressure acts equally in...

A device engineer plays a crucial role in designing user interfaces for mobile devices. One such interface is the resistive touchscreen, which fundamentally consists of two metallic layers: a flexible upper layer and a rigid lower layer, separated by a narrow gap. The high resistance between these two layers is a key characteristic of this design.
When a user touches the screen, the two layers make contact at a specific point known as the touchpoint. This contact reduces the resistance between...

Voltage and current measurements using a standard voltmeter and ammeter alter the circuit being measured either by drawing or resisting the current flow, which introduces uncertainties in the measurements. Null measurements balance the voltages so that no current flows through the measuring device and, therefore, no alterations occur in the measured circuit.
Suppose the emf of a battery needs to be measured. If the battery is directly connected to a standard voltmeter, the measured quantity is...

This procedural guide systematically measures blood pressure using an oscillometric digital sphygmomanometer, emphasizing accuracy, patient safety, and comfort.
Prepare for the Procedure:

Drag is a resistive force opposing an object’s motion through a fluid, resulting from surface pressure and shear forces. It comprises two components: a perpendicular one from pressure and a tangential one from shear stress. Accurate drag calculations use pressure and wall shear stress distributions, often determined through Computational Fluid Dynamics (CFD) or wind tunnel testing. The drag coefficient, a dimensionless measure, depends on factors like shape, Reynolds number, Mach number, Froude...