Related Experiment Video
Updated: May 31, 2026

Ultrasonic Fatigue Testing in the Tension-Compression Mode
Published on: March 7, 2018
Cumulative second-harmonic analysis of ultrasonic Lamb waves for ageing behavior study of modified-HP austenite steel
Yanxun Xiang1, Mingxi Deng, Fu-Zhen Xuan
1Key Laboratory of Safety Science of Pressurized System of MOE, School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai, China.
Abstract:
The cumulative second-harmonic analysis of ultrasonic Lamb wave has been performed to study the precipitation kinetics and microvoid initiation of ferritic Cr-Ni alloy steel during the ageing process. Ageing of ferritic Cr-Ni alloy materials have been done at 1223 K and 1173 K for different degradation time intervals and air cooled. The results show that the normalized acoustic nonlinearity of Lamb wave increases with the formation of fine precipitates at the early stage of ageing till about 1000 h and keeps as a plateau with the precipitates dynamic balance for a long-term ageing, and then decreases gradually at the final holding time with the coarsening of precipitates and initiation of microvoids. The results also show that the variation of nonlinear Lamb wave follows the same trend as that of hardness in materials. Therefore, the cumulative second-harmonic of ultrasonic Lamb waves has been found to be strongly sensitive to the precipitates behavior and microstructure evolution during the thermal ageing of ferritic Cr-Ni alloy steel.
More Related Videos
07:37Full-field Strain Measurements for Microstructurally Small Fatigue Crack Propagation Using Digital Image Correlation Method
Published on: January 16, 2019
08:40Ultrasonic Welding of Thermoplastic Composite Coupons for Mechanical Characterization of Welded Joints through Single Lap Shear Testing
Published on: February 11, 2016
Related Concept Videos
Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used to...
Temperature Dependent Deformation