Related Experiment Video
Updated: May 31, 2026

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices
Published on: July 8, 2016
Solution fabrication and photoelectrical properties of CuInS₂ nanocrystals on TiO₂ nanorod array
Zheng-Ji Zhou1, Jun-Qi Fan, Xia Wang
1Key Lab for Special Functional Materials of Ministry of Education, Henan University, Kaifeng 475004, China.
Abstract:
One-dimensional semiconductor architectures are receiving attention in preparing photovoltaic solar cells because of its superior charge transport as well as excellent light-harvesting efficiency. In this study, vertically aligned single-crystalline TiO(2) nanorods array was grown directly on transparent conductive glass (FTO), and then CuInS(2) nanocrystals were deposited on nanorods array by spin coating method to form TiO(2)/CuInS(2) heterostructure films. The resulting nanostructure assembly and composition was confirmed by field-emission scanning electron microscope (FESEM) , transmission electron microscopy (TEM), high-resolution TEM, and X-ray diffraction(XRD). Ultraviolet-visible absorption spectroscopy (UV-vis) data indicates that the absorbance of the nanocomposite film extended into the visible region compared with bare TiO(2) nanorod arrays. The surface photovoltage spectra (SPS) also showed a new and enhanced response region corresponding to the absorption spectrum. These results suggest that the novel CuInS(2) nanocrystals sensitized TiO(2) nanorod array on FTO photoelectrodes has a potential application in photovoltaic devices.

