Related Experiment Video
Updated: May 31, 2026
Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels
Published on: May 9, 2019
Profoundly improving flow properties of a cohesive cellulose powder by surface coating with nano-silica through
Sayantan Chattoraj1, Limin Shi, Changquan Calvin Sun
1Pharmaceutical Materials Science and Engineering Laboratory, Department of Pharmaceutics, University of Minnesota, Minneapolis, Minnesota 55455, USA.
Abstract:
Poor flow properties hinder the easy handling of powders during industrial-scale processing. In this work, we show that powder flow can be substantially improved by reducing the cohesion of powders by coating them with nanosized guest particles. We further show that comilling is an efficient process for nanocoating. We have systematically investigated the effects of total number of comilling cycles (10-70 cycles) and silica loading (0-1.0 wt %) on the flow behavior of a highly cohesive and poorly flowing grade of microcrystalline cellulose powder (Avicel PH105). Optimum flow enhancement has been achieved with 1.0 wt % silica loading at 40 comilling cycles. The flow properties of nanocoated Avicel PH105 are comparable to those of Avicel PH102, which exhibits adequate flowability for processing on a high-speed tablet press. Comilling is fast and suitable for continuous processing. It shows potential for addressing industrial powder handling problems caused by poor powder flow properties.
More Related Videos
11:26Towards Biomimicking Wood: Fabricated Free-standing Films of Nanocellulose, Lignin, and a Synthetic Polycation
Published on: June 17, 2014
07:25Green and Low-cost Production of Thermally Stable and Carboxylated Cellulose Nanocrystals and Nanofibrils Using Highly Recyclable Dicarboxylic Acids
Published on: January 9, 2017