Related Experiment Video
Updated: May 31, 2026

Force and Position Control in Humans - The Role of Augmented Feedback
Published on: June 19, 2016
Effects of four types of non-obtrusive feedback on computer behaviour, task performance and comfort
Elsbeth M de Korte1, Maaike A Huysmans, Annelise M de Jong
1TNO Work & Employment, P.O. Box 718, 2130 AS Hoofddorp, The Netherlands. elsbeth.dekorte@tno.nl
Abstract:
This study investigated the effects of non-obtrusive feedback on continuous lifted hand/finger behaviour, task performance and comfort. In an experiment with 24 participants the effects of two visual and two tactile feedback signals were compared to a no-feedback condition in a computer task. Results from the objective measures showed that all types of feedback were equally effective to reduce lifted hand/finger behaviour (effectiveness) compared to absence of feedback, while task performance was not affected (efficiency). In contrast to objective measures, subjective user experience was significantly different for the four types of feedback signals. Continuous tactile feedback appeared to be the best signal; not only the effectiveness and efficiency were rated reasonable, it also scored best on perceived match between signal and required action. This study shows the importance of including user experiences when investigating usability of feedback signals. Non-obtrusive feedback embedded in products and environments may successfully be used to support office workers to adopt healthy, productive and comfortable working behaviour.
Related Concept Videos
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Negative and Positive Feedback
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

