Optical evidence for reactive processes when embedding Cu nanoparticles in Al(2)O(3) by pulsed laser deposition

The optical response of nanocomposite thin films formed by Cu nanoparticles (NPs) embedded in amorphous aluminium oxide (Al(2)O(3)) prepared by pulsed laser deposition (PLD) in vacuum is studied in order to investigate the possible existence of reactive processes on the Cu NPs during their covering with Al(2)O(3). The study is performed as a function of the laser fluence on the Al(2)O(3) target (0.6-4.6 J cm(-2)), while the laser fluence for Cu ablation is kept constant (1.8 J cm(-2)). The structural analysis of the films shows that they are formed by a high density of NPs with average dimensions in the 4.9-5.9 nm range. The optical response of the films has been followed in situ by real-time reflectivity measurements at 633 nm and after deposition by transmission measurements as a function of wavelength around the surface plasmon resonance (SPR). For low laser fluences on the Al(2)O(3) target, the absorption spectrum is dominated by a well-defined SPR absorption band at 1.9 eV. As the laser fluence is increased, the intensity of the absorption band associated with the SPR decreases and shifts to 2.1 eV. The films deposited at low fluences contain metallic Cu NPs and, as the laser fluence increases sputtering of Cu from the NPs and mixing of the species from the Al(2)O(3) deposition with the Cu from the NPs surface takes place. The latter process leads to the formation of an Al-Cu oxide cover on the Cu NPs. The present results provide evidence for mixing of species from the host and Cu at the surface of the NPs, and it is shown how the degree of mixing depends on the laser fluence used to ablate the Al(2)O(3) host target.