Electrochemical degradation of a real textile effluent using boron-doped diamond or β-PbO2 as anode

Constant current electrolyses are carried out in a filter-press reactor using a boron-doped diamond (Nb/BDD) or a Ti-Pt/β-PbO(2) anode, varying current density (j) and temperature. The degradation of the real textile effluent is followed by its decolorization and chemical oxygen demand (COD) abatement. The effect of adding NaCl (1.5 g L(-1)) on the degradation of the effluent is also investigated. The Nb/BDD anode yields much higher decolorization (attaining the DFZ limit) and COD-abatement rates than the Ti-Pt/β-PbO(2) anode, at any experimental condition. The best conditions are j = 5 mA cm(-2) and 55 °C, for the system's optimized hydrodynamic conditions. The addition of chloride ions significantly increases the decolorization rate; thus a decrease of more than 90% of the effluent relative absorbance is attained using an applied electric charge per unit volume of the electrolyzed effluent (Q(ap)) of only about 2 kA h m(-3). Practically total abatement of the effluent COD is attained with the Nb/BDD anode using a Q(ap) value of only 7 kA h m(-3), with an energy consumption of about 30 kW h m(-3). This result allows to conclude that the Nb/BDD electrode might be an excellent option for the remediation of textile effluents.