Pt-CeO2 coating of carbon nanotubes grown on anode gas diffusion layer of the polymer electrolyte membrane fuel cell

The growing of carbon nanotubes on a gas diffusion layer (GDL) was investigated using electron microscopy and photoelectron spectroscopy. The 30 nm thick Pt doped CeO2 layers were deposited by (rf) magnetron sputtering using a CeO2-Pt target on a carbon diffusion layer overgrown by carbon nanotubes. The anode prepared in such a way was tested in the proton exchange membrane fuel cell. Hydrogen/air fuel cell activity measurements normalized to the amount of used Pt revealed high specific power (W mg(-1) Pt). The high activity of this anode with CNT-grown is explained by high specific area of the catalyst, high conductivity of CNT-GDL junction and high activity of platinum present in cationic state Pt2,4+. Very high specific power and low cost together with physical vapor deposition of catalyst makes this anode preparation promising for micro fabrication of fuel cells to power mobile systems.