Related Experiment Video
Updated: May 30, 2026

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Published on: June 9, 2016
Characterization of residential wood combustion particles using the two-wavelength aethalometer
Yungang Wang1, Philip K Hopke, Oliver V Rattigan
1Center for Air Resource Engineering and Science, Clarkson University, Potsdam, New York 13699-5708, United States.
Abstract:
In the United States, residential wood combustion (RWC) is responsible for 7.0% of the national primary PM(2.5) emissions. Exposure to RWC smoke represents a potential human health hazard. Organic components of wood smoke particles absorb light at 370 nm more effectively than 880 nm in two-wavelength aethalometer measurements. This enhanced absorption (Delta-C = BC(370 nm) - BC(880 nm)) can serve as an indicator of RWC particles. In this study, aethalometer Delta-C data along with measurements of molecular markers and potassium in PM(2.5) were used to identify the presence of airborne RWC particles in Rochester, NY. The aethalometer data were corrected for the loading effect. Delta-C was found to strongly correlate with wood smoke markers (levoglucosan and potassium) during the heating season. No statistically significant correlation was found between Delta-C and vehicle exhaust markers. The Delta-C values were substantially higher during winter compared to summer. The winter diurnal pattern showed an evening peak around 21:00 that was particularly enhanced on weekends. A relationship between Delta-C and PM(2.5) was found that permits the estimation of the contribution of RWC particles to the PM mass. RWC contributed 17.3% to the PM(2.5) concentration during the winter. Exponential decay was a good estimator for predicting Delta-C concentrations at different winter precipitation rates and different wind speeds. Delta-C was also sensitive to remote forest fire smoke.
Related Concept Videos
Flame Photometry: Lab
Flame Photometry: Overview
Gas Chromatography: Types of Detectors-II
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...
Atomic Emission Spectroscopy: Instrumentation
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing nebulizer...

