Related Experiment Video
Updated: May 30, 2026

Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model
Published on: May 23, 2018
Facile and sensitive spectrophotometric determination of vanadium in various samples
K Suresh Kumar1, S H Kang, K Suvardhan
1Department of Chemistry and Research Institute of Physics and Chemistry (RINPAC), Chonbuk National University, Jeonju 561-756, Republic of Korea.
Abstract:
Novel reactions were developed for facile, sensitive and selective rapid spectrophotometric determination of trace amounts of vanadium(V) in various samples. The methods were based on the interactions of 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) with N-(1-naphthyl)ethylenediamine dihydrochloride (NEDA) in the presence of vanadium to give blue colored derivative or on oxidation of dopamine hydrochloride (DPH) by vanadium in acidic medium and coupling with MBTH to yield pink color derivative. The blue color derivative having an absorbance maximum at 595nm was stable for 9 days and the pink color derivative with λ(max) 526nm for 5 days. Beer's law is obeyed for vanadium in the concentration range 0.05-6.0μgml(-1) (blue color derivative) and 0.06-7.0μgml(-1) (pink color derivative), respectively. The optimum reaction conditions and other important analytical parameters were established. Interference due to various non-target ions was also investigated. The proposed methods were applied to the analysis of vanadium(V) in environmental, biological, pharmaceutical and steel samples. The performance of proposed method was evaluated in terms of Student's t-test and variance ratio F-test that indicates the significance of proposed method over reported method.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
09:51TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples
Published on: September 19, 2025
Related Concept Videos
Effects of EDTA on End-Point Detection Methods
In the visual method, metal-ion indicators (metallochromic dyes), which have distinct colors in their free and complex forms, are added to the mixture to signal the titration's end point. They form stable complexes with metal ions, but these complexes are weaker than the corresponding metal–EDTA complexes. As a result, EDTA...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
UV–Vis Spectrometers
Voltammetry: Overview
A voltammetric cell uses three electrodes: a working electrode, a reference electrode, and an auxiliary electrode. The redox reactions occur in the working...
Ultraviolet and Visible (UV–Vis) Spectroscopy: Overview
Voltammetric Techniques: Pulse Voltammetry