Phases and phase transitions of hexagonal cobalt oxide films on Ir(100)-(1 × 1)

Cobalt oxides on the unreconstructed Ir(100) surface were prepared by reactive deposition of Co established by simultaneous oxygen flux at about 50 °C and subsequent annealing. The films were investigated by low-energy electron diffraction (LEED), scanning tunnelling microscopy (STM) and thermal desorption spectroscopy (TDS). We show that in spite of the quadratic unit mesh of the substrate, oxide films of (111) orientation develop. As long as oxygen-rich conditions are maintained they are of spinel-type Co(3)O(4)(111). They are non-pseudomorphic and transform to rocksalt-type CoO(111) when oxygen loss is induced by annealing at elevated temperatures. Thin films of CoO(111) are commensurate, and so, in order to realize that, they exhibit a slightly distorted unit cell when below a thickness equivalent to about seven cobalt monolayers. With increasing film thickness the uniaxial strain accompanied by the commensurability is gradually relieved by the insertion of dislocations so that eventually the film assumes ideal hexagonality. All CoO(111)-type surfaces are reconstructed at low sample temperatures equivalent to a [Formula: see text] superstructure. They reversibly transform into a (1 × 1) phase at about 50 °C.