Related Experiment Video
Updated: May 30, 2026

Tuning Oxide Properties by Oxygen Vacancy Control During Growth and Annealing
Published on: June 9, 2023
Mixed conductivity, nonstoichiometric oxygen, and oxygen permeation properties in Co-Doped Sr3Ti2O(7-δ)
Sirikanda Nuansaeng1, Masatomo Yashima, Maki Matsuka
1Department of Applied Chemistry, Kyushu University, Motooka 744, Nishi-ku, Fukuoka 8190395, Japan.
Abstract:
Electrical conductivity and oxygen permeation rates in Co-doped Sr(3)Ti(2)O(7-δ) with Ruddesden-Popper type structures were investigated. The effects of metal dopants (M) in the Ti site of Sr(3)Ti(2)(M)O(7-δ) on the mixed conductivity were also studied. Doping of Sr(3)Ti(2)O(7-δ) with Co was found to be effective for improving the electrical conductivity as well as the oxygen permeation rate, which could be assigned to the increased oxygen vacancy concentration by doping Co(3+) into Ti(4+) sites. The nonstoichiometric oxygen of these oxides was measured by using a thermal gravimetric method. The creation of oxygen vacancies, which is compensated with Co(3+) doping, leads to higher oxide ion conductivity. The oxygen permeation rate monotonously increased with increasing amounts of Co in the Ti site. Sr(3)Ti(0.8)Co(1.2)O(7-δ) exhibited high oxide ion conductivity and a large oxygen permeation rate. The highest oxygen permeation rate achieved a value of 2.02 cc min(-1) cm(-2) at 1273 K for Sr(3)Ti(0.8)Co(1.2)O(7-δ). Neutron diffraction analysis and redox titration suggests that the oxygen diffusion occurs through oxygen vacancies in the perovskite block, but not through excess oxygen in the rock salt block.
Related Concept Videos
Imperfections in Crystal Structure: Non-Stoichiometric Defects
Imperfections in Crystal Structure: Stoichiometric Point Defects
Properties of Transition Metals

