Related Experiment Video
Updated: May 29, 2026

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
Realization of all-optical multi-logic functions and a digital adder with input beam power management for multi-input
Bikash Nakarmi1, M Rakib-Uddin, Yong Hyub Won
1Korea Advanced Institute of Science and Technology, 291 Daehak-ro, 373-1 Guseon-dong, Yuseong-gu, Daejeon 305-701, Korea. bikash@kaist.ac.kr
Abstract:
We propose a novel idea for the suppression of the dominant mode of the single-mode Fabry-Pérot laser diode (SMFP-LD) to realize all-optical multi-logic functions and a digital adder. The basic principle of the proposed scheme is the power management of input beams to suppress the dominant mode of the SMFP-LD for multi-input injection locking. The proposed principle is explained and implemented to realize all-optical multi-logic functions and a digital adder at an input data rate of 10 Gbps. A clear eye opening with an extinction ratio of about 12 dB and a rising-falling time of less than 40 ps are observed at the outputs. The bit error rate (BER) performance is measured for all logic gates and half adder operation. We found there is no BER floor up to BER of 10(-12) and the maximum power penalty of about 1.2 dB at a BER of 10(-9).
