Related Experiment Video
Updated: May 27, 2026

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
Timing jitter optimization of mode-locked Yb-fiber lasers toward the attosecond regime
Youjian Song1, Chur Kim, Kwangyun Jung
1KAIST Institute for Optical Science and Technology and School of Mechanical, Aerospace and Systems Engineering, Korea Advanced Institute of Science and Technology, Daejeon 305-701, Korea.
Abstract:
We demonstrate ultra-low timing jitter optical pulse trains from free-running, 80 MHz repetition rate, mode-locked Yb-fiber lasers. Timing jitter of various mode-locking conditions at close-to-zero intracavity dispersion (-0.004 to +0.002 ps(2) range at 1040 nm center wavelength) is characterized using a sub-20-attosecond-resolution balanced optical cross-correlation method. The measured lowest rms timing jitter is 175 attoseconds when integrated from 10 kHz to 40 MHz (Nyquist frequency) offset frequency range, which corresponds to the record-low timing jitter from free-running mode-locked fiber lasers so far. We also experimentally found the mode-locking conditions of fiber lasers where both ultra-low timing jitter and relative intensity noise can be achieved.

