Related Experiment Video
Updated: May 29, 2026

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
Interference by the activated sludge matrix on the analysis of soluble microbial products in wastewater
Christopher M Potvin1, Hongde Zhou
1University of Guelph, School of Engineering, Guelph, Ontario, Canada. cpotvin@uoguelph.ca
Abstract:
The objective of this study was to demonstrate the effects of complex matrix effects caused by chemical materials on the analysis of key soluble microbial products (SMP) including proteins, humics, carbohydrates, and polysaccharides in activated sludge samples. Emphasis was placed on comparison of the commonly used standard curve technique with standard addition (SA), a technique that differs in that the analytical responses are measured for sample solutions spiked with known quantities of analytes. The results showed that using SA provided a great improvement in compensating for SMP recovery and thus improving measurement accuracy by correcting for matrix effects. Analyte recovery was found to be highly dependent on sample dilution, and changed due to extraction techniques, storage conditions and sample composition. Storage of sample extracts by freezing changed SMP concentrations dramatically, as did storage at 4°C for as little as 1d.
Related Concept Videos
Microbial Wastewater Treatment
Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Interferences
Biological Treatment of Effluent and Waste Water
Atomic Absorption Spectroscopy: Interference
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
Microbial Biosensors

