Related Experiment Video
Updated: May 29, 2026

Three-Dimensional Preoperative Virtual Planning in Derotational Proximal Femoral Osteotomy
Published on: February 17, 2023
Proximal femoral anatomy in total hip arthroplasty. A tri-planar computed tomographic assessment
Adeel Rasool Memon1, Joseph Butler, Shane Guerin
1Department of Trauma and Orthopaedics, Cork University Hospital, Wilton Road, Cork, Ireland. dowite2003@hotmail.com
Abstract:
The relationship between the tip of the Greater Trochanter (GT) and the centre of the Femoral Head (FH) is commonly used as reference point to align the femoral component during hip arthroplasty. We performed tri-planar computed tomography analysis of the proximal femoral anatomy in a series of 150 patients (n = 150) to accurately delineate this relationship. The mean location for the centre of the FH was 8.64 mm (95% confidence interval, 9.44-7.83) distal to the tip of the GT. The centre of the FH was found to be distal to the tip of the GT in 90.6% of cases. Hence we would suggest caution in using the tip of the GT as a reference point during total hip arthroplasty as it could be associated with an inadvertent intraoperative leg lengthening.
Related Concept Videos
Bones of the Lower Limb: Femur and Patella
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
Imaging Studies III: Computed Tomography
