Related Experiment Video
Updated: May 28, 2026

Self-standing Electrochemical Set-up to Enrich Anode-respiring Bacteria On-site
Published on: July 24, 2018
Enhancement of hydrogen production in a single chamber microbial electrolysis cell through anode arrangement
Da-Wei Liang1, Si-Kan Peng, Shan-Fu Lu
1School of Chemistry and Environment, Beihang University, 37 Xueyuan Road, Beijing, PR China. liangdw@buaa.edu.cn
Abstract:
Reducing the inner resistances is crucial for the enhancement of hydrogen generation in microbial electrolysis cells (MECs). This study demonstrates that the optimization of the anode arrangement is an effective strategy to reduce the system resistances. By changing the normal MEC configuration into a stacking mode, namely separately placing the contacted anodes from one side to both sides of cathode in parallel, the solution, biofilm and polarization resistances of MECs were greatly reduced, which was also confirmed with electrochemical impedance spectroscopy analysis. After the anode arrangement optimization, the current and hydrogen production rate (HPR) of MEC could be enhanced by 72% and 118%, reaching 621.3±20.6 A/m3 and 5.56 m3/m3 d respectively, under 0.8 V applied voltage. A maximum current density of 1355 A/m3 with a HPR of 10.88 m3/m3 d can be achieved with 1.5 V applied voltage.
Related Concept Videos
Microbial Fuel Cells
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the surface of...
Batteries and Fuel Cells
