Development of a novel bioelectrochemical membrane reactor for wastewater treatment

A novel bioelectrochemical membrane reactor (BEMR), which takes advantage of a membrane bioreactor (MBR) and microbial fuel cells (MFC), is developed for wastewater treatment and energy recovery. In this system, stainless steel mesh with biofilm formed on it serves as both the cathode and the filtration material. Oxygen reduction reactions are effectively catalyzed by the microorganisms attached on the mesh. The effluent turbidity from the BEMR system was low during most of the operation period, and the chemical oxygen demand and NH(4)(+)-N removal efficiencies averaged 92.4% and 95.6%, respectively. With an increase in hydraulic retention time and a decrease in loading rate, the system performance was enhanced. In this BEMR process, a maximum power density of 4.35 W/m(3) and a current density of 18.32 A/m(3) were obtained at a hydraulic retention time of 150 min and external resister of 100 Ω. The Coulombic efficiency was 8.2%. Though the power density and current density of the BEMR system were not very high, compared with other high-output MFC systems, electricity recovery could be further enhanced through optimizing the operation conditions and BEMR configurations. Results clearly indicate that this innovative system holds great promise for efficient treatment of wastewater and energy recovery.