One-dimensional single-shot thermometry in flames using femtosecond-CARS line imaging

We report single-laser-shot one-dimensional thermometry in flames using femtosecond coherent anti-Stokes Raman scattering (fs-CARS) line imaging. Fs-CARS enables high-repetition-rate (1-10 kHz), nearly collision-free measurement of temperature and species concentration in reacting flows. Two high-power 800 nm beams are used as the pump and probe beams and a 983 nm beam is used as the Stokes beam for CARS signal generation from the N2Q-branch transitions at ∼2330 cm(-1). The probe beam is frequency-chirped for single-laser-shot imaging. All three laser beams are formed into sheets and crossed in a line which forms the probe region. The resulting 1D line-CARS signal at ∼675 nm is spatially and spectrally resolved and recorded as a two-dimensional (2D) image. Single-shot temperature measurements are demonstrated in flat-field flames up to temperatures exceeding 2000 K, demonstrating the potential of fs-CARS line imaging for high-repetition-rate thermometry in turbulent flames. Such measurements can provide valuable data to validate complex turbulent-combustion models as well as increase the understanding of the spatio-temporal instabilities in practical combustion devices such as modern gas-turbine combustors and augmentors.