Related Experiment Video
Updated: May 27, 2026

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Methodologies to study the surface hydraulic behaviour of urban catchments during storm events
M Gómez1, F Macchione, B Russo
1Department of Hydraulic, Maritime and Environmental Engineering, Technical University of Catalonia (UPC), Jordi Girona 1-3, 08034, Barcelona, Spain. manuel.gomez@upc.edu
Abstract:
A good knowledge of the hydraulic behaviour of an urban catchment and its surface drainage system is an essential requirement to guarantee traffic and pedestrian safety. In many cases, inlets have been situated according to spatial density criteria. Indeed a more rational location of inlets on urban catchments must be defined according to an accurate analysis of the relationship between street flow and inlet hydraulic efficiency. Moreover we lack specific hazard criteria in terms of the maximum acceptable flow depths and velocities on the streets that do not cause problems to pedestrians. In this paper the results of two different experimental campaigns are presented. The first was carried out to evaluate inlet hydraulic efficiency; the second was carried out to address the pedestrian stability in urban flood conditions, whose aim was to propose new hazard criteria. On the basis of the experimental results, a methodology was developed to assess flood hazard in urban areas during storm events. If a refined topographic representation of urban areas is available, a two-dimensional numerical simulation of urban flooding can be performed using complete shallow water equations. According to this approach a numerical application for flood hazard assessment in a street of Barcelona is shown.
Related Concept Videos
Typical Model Studies
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Creating a Hydraulic Model of a Dam Spillway
Hydraulic Jump: Problem Solving
Rapidly Varying Flow

