Variation of algal viability during electrochemical disinfection using Ti/RuO2 electrodes

This paper studied the influence of the operating conditions, e.g., current density, electrolyte and exposure time, on the variation of the algal viability during electrochemical disinfection processes. An electrochemical tube employing Ti/RuO2 as anodes was constructed for inactivation of cyanobacteria (often called blue-green algae) Microcystis aeruginosa. Viability of algal cells was determined by 2,3,5-triphenyl-tetrazoliumchloride (TTC) dehydrogenase activity assay and neutral red (NR) staining assay. Algal suspensions with cell density of 5-7 x 10(9) L(-1) were exposed to current densities from 1 to 8 mA cm(-2) at room temperature (25-30 degrees C) for 30 min. The results showed that the cell viability decreased obviously with the increase of current density. After exposure to 4 mA cm(-2) for more than 7 min, Microcystis aeruginosa didn't have the ability to resume growth. Comparative disinfection tests with different electrolytes were conducted, including chlorides, sulfates, nitrates and phosphates. Microcystis aeruginosa appeared to be sensitive to electro-generated chlorine oxidants. The inactivation effect was also demonstrated to occur in chlorine-free electrolytes. However, decrease of the inactivation effect by adding ascorbic acid as an oxidant scavenger indicated that the reactive oxygen species, especially *OH radicals, played an important role for chlorine-free electrolytes.