Polycaprolactone scaffolds fabricated with an advanced electrohydrodynamic direct-printing method for bone tissue...

Electrohydrodynamic (EHD) direct writing has been used in diverse microelectromechanical systems and various supplemental methods for biotechnology and electronics. In this work, we expanded the use of EHD-induced direct writing to fabricate 3D biomedical scaffolds designed as porous structures for bone tissue engineering. To prepare the scaffolds, we modified a grounded target used in conventional EHD direct printing using a poly(ethylene oxide) solution bath, elastically cushioning the plotted struts to prevent crumbling. The fabricated scaffolds were assessed for not only physical properties including surface roughness and water uptake ability but also biological capabilities by culturing osteoblast-like cells (MG63) for the EHD-plotted polycaprolactone (PCL) scaffold. The EHD-scaffolds showed significantly roughened surface and enhanced water-absorption ability (400% increase) compared with the pure rapid-prototyped PCL. The results of cell viability, alkaline phosphatase activity, and mineralization analyses showed significantly enhanced biological properties of the scaffold (20 times the cell viability and 6 times the mineralization) compared with the scaffolds fabricated using RP technology. Because of the results, the modified EHD direct-writing process can be a promising method for fabricating 3D biomedical scaffolds in tissue engineering.