Related Experiment Video
Updated: May 27, 2026

Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation
Published on: September 29, 2019
Theoretical and experimental study of the nonlinear resonance vibration of cementitious materials with an application
Jun Chen1, Jin-Yeon Kim, Kimberly E Kurtis
1Department of Civil Engineering, School of Transportation Science and Engineering, Beihang University, Beijing, 100191, People's Republic of China. junchen@buaa.edu.cn
Abstract:
This paper presents a theoretical and experimental study of the nonlinear flexural vibration of a cement-based material with distributed microcracks caused by an important deterioration mechanism, alkali-silica reaction (ASR). The general equation of motion is derived for the flexural vibration of a slender beam with the nonlinear hysteretic constitutive relationship for consolidated materials, and then an approximate formula for excitation-dependent resonance frequency is obtained. A downward shift of the resonance frequency is related to the nonlinearity parameters defined in the constitutive relationship. Vibration experiments are conducted on standard mortar bar samples undergoing progressive ASR damage. The absolute nonlinearity parameters are determined from these experimental results using the theoretical solution in order to investigate their dependence on the damage state of the material. With the progress of the ASR damage, the absolute value of the hysteresis nonlinearity parameter increases by as much as six times from the intact (undamaged) state in the sample with highly reactive aggregate; this is in contrast to a change of about 16% in the linear resonance frequency. It is demonstrated that the combined theoretical and experimental approach developed in this research can be used to quantitatively characterize ASR damage in mortar samples and other cement-based materials.
Related Concept Videos
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Microcracking in Concrete
Soundness of Cement
Creep in Concrete
Non-destructive Tests for Concrete Strength
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
