Related Experiment Video
Updated: May 27, 2026

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
Experimental demonstration of coherent beam combining over a 7 km propagation path
Thomas Weyrauch1, Mikhail A Vorontsov, Gary W Carhart
1Intelligent Optics Laboratory, School of Engineering, University of Dayton, Dayton, Ohio 45469–2951, USA. thomas.weyrauch@udayton.edu
Abstract:
We demonstrate coherent combining (phase locking) of seven laser beams emerging from an adaptive fiber-collimator array over a 7 km atmospheric propagation path using a target-in-the-loop (TIL) setting. Adaptive control of the piston and the tip and tilt wavefront phase at each fiber-collimator subaperture resulted in automatic focusing of the combined beam onto an unresolved retroreflector target (corner cube) with precompensation of quasi-static and atmospheric turbulence-induced phase aberrations. Both phase locking (piston) and tip-tilt control were performed by maximizing the target-return optical power using iterative stochastic parallel gradient descent (SPGD) techniques. The performance of TIL coherent beam combining and atmospheric mitigation was significantly increased by using an SPGD control variation that accounts for the round-trip propagation delay (delayed SPGD).
Related Concept Videos
Propagation of Waves
Consider a scenario where a wave propagates from a string of low linear mass density to a string of high linear mass density. In such a case, the reflected wave is out of phase with respect to the incident wave, however the...
Propagation Speed of Electromagnetic Waves
Interference and Diffraction
Doppler Effect - II
Distance Measurements by Taping
Plane Electromagnetic Waves II
