A dual-cathode electro-Fenton oxidation coupled with anodic oxidation system used for 4-nitrophenol degradation

The degradation of 4-nitrophenol was investigated using a novel electrochemical oxidation system, in which the anodic oxidation at Ti/SnO(2)-Sb(2)O(5)-IrO(2) electrode and the electro-Fenton oxidation with two cathodes were involved. In this system, gas diffusion electrode (GDE) was used to generate H(2)O(2) by O(2) reduction and graphite electrode was employed for the reduction of Fe(3+) regenerating Fe(2+). When the potential values of GDE and graphite cathode were controlled at -0.80 and -0.10 V/SCE respectively, the optimum Fe(2+) concentration for 4-nitrophenol degradation was about 0.10mM, much lower than the concentration of 0.25 mM obtained in the single-cathode system. Due to the combination of electro-Fenton oxidation and anodic oxidation, an effective degradation and a high mineralization current efficiency (MCE) were achieved. After 600 min treatment, 74.5% of the original TOC was removed by the dual-cathode oxidation system. Moreover, it was confirmed that 57.0% of the original nitrogen could be removed in gaseous form from the simulated wastewater. These results indicate that this electrochemical oxidation process might provide an alternative for the degradation of organic pollutants.