Related Experiment Video
Updated: May 27, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Effects of bed material size distribution, operating conditions and agglomeration phenomenon on heavy metal emission
Zhen-Shu Liu1, Tzu-Huan Peng, Chiou-Liang Lin
1Department of Safety, Health and Environmental Engineering, Ming Chi University of Technology, 84 Gungjuan Rd., Taishan, Taipei 243, Taiwan, ROC.
Abstract:
This study investigates the effects of the bed material size distribution, the operating conditions and the agglomeration/defluidization phenomenon on the heavy metal pollutant emissions in the combustion process. After defluidization, the emission concentration of heavy metals increased, because Na may form a low melting eutectic material that enhances bed material adherence. The emission of Cd increased when the feed simulated urban residues contained sodium; however, the presence of Na had no significant effect on the emission of Cr. Furthermore, the Cd emission concentration was low when the material had a Gaussian distribution; however, the decreases in the Cd emission when the bed material had narrow, binary or flat distributions were not significant. The heavy metal Cr showed the same trend. In addition to the operating parameters, the bed material size distribution may influence the heavy metal emissions during combustion processes.
Related Concept Videos
Atomic Emission Spectroscopy: Interference
Acid Mine Drainage
Atomic Absorption Spectroscopy: Atomization Methods

