Kinetics and equilibrium of adsorption of dissolved organic matter fractions from secondary effluent by fly ash
Related Experiment Video
Updated: May 27, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Liangliang Wei1, Kun Wang, Qingliang Zhao
1School of Municipal & Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China. llwei1985@126.com
Abstract:
Fly ash was used as a low-cost adsorbent for removing dissolved organic matter (DOM) in secondary effluent. Batch experiments were conducted under various adsorbent dosages, pH, contact time, temperatures and DOM fractional characteristics. Under the optimum conditions of fly ash dosage of 15 g/L, temperature of 303 K and contact time of 180 min, a removal of 22.5% of the dissolved organic carbon (DOC), 23.7% of UV-254, 25.9% of the trihalomethanes precursors in secondary effluent was obtained. The adsorption of DOM fractions onto fly ash all followed the pseudo second-order kinetic model, and the hydrophilic fraction adsorption by fly ash also fitted the intraparticle diffusion model quite well. Freundlich and Langmuir models were applicable to the fly ash adsorption and their constants were evaluated. The maximum adsorption capacities of the adsorptions revealed that fly ash was more effective in adsorbing hydrophilic fraction than the acidic fractions. Structure changes of the DOM fractions after fly ash adsorption were also characterized via spectrum analyzing. Those mechanisms presented critical step toward improved efficiencies of fly ash adsorption via further surface-modification.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
Related Concept Videos
Adsorption Isotherms I
Adsorption Isotherms II
Factors Affecting Solubility
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Adsorption of Gases on Solids
Analyte Adsorption and Distribution