Determination of L- and D-fucose using amperometric electrodes based on diamond paste

Monocrystalline diamond (natural diamond, synthetic-1 and synthetic-2) based electrochemical electrodes were designed for the analysis of L- and D-fucose. Response characteristics of the electrochemical electrodes were determined using cyclic voltammetry and differential pulse voltammetry (DPV). L-fucose was determined using DPV with electrodes based on natural diamond, synthetic-1 and synthetic-2, respectively, at 240 mV using NaCl as the electrolyte (pH 3.0); at 160 mV using KNO(3) (pH 10.0) and at 80 mV using KCl as the electrolyte (pH 10.0) while D-fucose was analyzed at 120 mV using KCl as the electrolyte (pH 1.0); at 140 mV using KNO(3) as the electrolyte (pH 1.0) and at 160 mV using NaNO(3) as the electrolyte (pH 3.0). The linear concentration ranges for L-fucose were between 10(-13) and 10(-9) mol L(-1) (natural diamond), 10(-11) and 10(-8) mol L(-1) (synthetic-1) and 10(-6) and 10(-3) mol L(-1) (synthetic-2) with detection limits of 10(-14), 10(-12) and 10(-8) mol L(-1) magnitude order, respectively. For D-fucose, the linear concentration ranges were 10(-6) to 10(-3) mol L(-1) (natural diamond), 10(-5) to 10(-3) mol L(-1) (synthetic-1) and 10(-9) to 10(-3) mol L(-1) (synthetic-2) with detection limits of 10(-7), 10(-7) and 10(-10) mol L(-1) magnitude order, respectively. The sensors were used for the assay of L-fucose in serum and urine samples.