Behavior of biofilters for waste air biotreatment. 1. Dynamic model development

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...

Maintaining optimal conditions within fermenters is essential for maximizing microbial productivity and ensuring process efficiency. This lesson focuses on key parameters—temperature, foam, pH, carbon dioxide, oxygen, and pressure—and their precise measurement and control strategies in fermentation systems.Temperature ControlTemperature regulation is critical due to the exothermic nature of many fermentation processes. In small laboratory fermenters, temperature is commonly monitored using...

Microorganisms play a pivotal role in maintaining ecosystem balance by recycling essential elements such as carbon, nitrogen, and phosphorus, as well as supporting processes like bioremediation, wastewater treatment, and biofuel production.Microbes in Elemental CyclesIn the carbon cycle, microorganisms decompose organic matter, releasing carbon dioxide via aerobic respiration. This carbon dioxide is subsequently used by photosynthetic organisms to synthesize organic compounds, closing the...

The process of breathing involves the periodic intake and expulsion of air, known as the respiratory cycle, which typically lasts about five seconds. Modeling the volume of air inhaled into the lungs as a function of time provides insight into both the dynamics and efficiency of pulmonary ventilation. This volume is determined by integrating the airflow rate over time, which captures the cumulative effect of air entering the lungs.Sinusoidal Model of AirflowAirflow during respiration is not...

Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.