Related Experiment Video
Updated: May 26, 2026

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Dissolution and transport of coal tar compounds in fractured clay-rich residuum
Vijay M Vulava1, Larry D McKay, Mette M Broholm
1College of Charleston, Department of Geology and Environmental Geosciences, 66 George Street, Charleston, SC 29424, USA. vulavav@cofc.edu
Abstract:
We investigated the dissolution and transport of organic contaminants from a crude coal tar mixture in a monolith of fractured clay-rich residuum. An electrolyte solution was eluted through the residuum monolith containing a small emplaced source of coal tar under biologically inhibited and mildly acidic conditions. Concentrations of 10 coal tar compounds, representing mono-, poly-, and heterocyclic aromatic hydrocarbons that constitute crude coal tar were monitored in the effluent over a period of 377 days. Most compounds appeared in the effluent within the first 0.1 pore volume eluted indicating the importance of rapid dissolution and transport through the fracture networks. The concentrations continued to rise but did not reach the corresponding effective solubility limit in most cases. Compounds that were less soluble and those that were more susceptible to sorption or matrix diffusion eluted at a much slower rate. Analysis of contaminant concentrations in microcore residuum samples indicated that all 10 compounds had spread throughout the entire monolith and had diffused into the fine-grained matrix between fractures. These data suggest that the predominantly fine pore structure did not appear to inhibit coal tar dissolution and subsequent transport, even though only a small portion of tar was in direct contact with fractures and macropores that control most flow.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Theories of Dissolution: The Danckwerts' Model and Interfacial Barrier Model
Entropy and Solvation
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the aggregate...
Microbial Bioremediation of Hydrocarbons
Porosity in Cement Paste
The balance of water to cement in the mix is critical—it...

