Hydraulic behaviour and removal efficiencies of two H-SSF constructed wetlands for wastewater reuse with different operational life
Related Experiment Video
Updated: May 26, 2026

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment
Published on: May 2, 2025
S Barbagallo1, G L Cirelli, A Marzo
1Department of Agrofood and Environmental System Management, University of Catania, Via S. Sofia 100, Catania 95123, Italy.
Abstract:
This work focuses on the performance evaluation of two full-scale horizontal suburface flow constructed wetlands (H-SSF CWs) working in parallel, which have an almost equal surface area (about 2,000 m2) but with different operational lives: 8 and 3 years. Both H-SSF CWs, located in Southern Italy (Sicily), are used for tertiary treatment of the effluent of a conventional wastewater treatment plant. This study evaluates and compares H-SSF CW efficiency both in terms of water quality improvement (removal percentage) and achievement of Italian wastewater discharge and irrigation reuse limits. The mean removal percentage, for the overall operational life, of TSS, COD and BOD (80%, 63%, 58% obtained for H-SSF1 and 67%, 38%, 41% for H-SSF2), confirm the high reliability of CWs for wastewater treatment. However, despite the satisfactory removal of microbial indicators (the mean E. coli removal was up to 2.5 log unit for both beds), CWs didn't achieve the Italian limits for wastewater reuse. Information on hydraulic properties of the CWs were extracted from breakthrough curves of a non-reactive tracer (NaCl). By comparing the nominal (tau(n)) and actual residence time (tau), hydraulic behaviour was revealed.
More Related Videos
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Published on: August 19, 2018
08:49Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Related Concept Videos
Weir: Problem Solving
Design Example: Creating a Hydraulic Model of a Dam Spillway
Weir
Typical Model Studies
Gradually Varying Flow
Underflow Gates