Determination of water content by capillary gas chromatography coupled with thermal conductivity detection
A Lodi1, M S Bellini, A Clavel
1European Directorate for the Quality of Medicines & HealthCare, Council of Europe, Strasbourg, France.
Abstract:
This article presents some experience obtained by applying capillary gas chromatography coupled with thermal conductivity detection (GC/TCD) to the determination of water in substances for pharmaceutical use. This technique represents a useful, orthogonal tool complementary to water determination methods based on volumetric or coulometric titration. It can also represent an alternative technique when such titrations are not applicable. This article presents the preliminary results obtained in a number of case studies where a GC/TCD procedure was applied in comparison with pharmacopoeial methods to substances with different water contents.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Volatilization


